The internal nipple part adjust the screw to adjust the separation ratio. Toggle switch is convenient for operation during production. The machine is easy to operate and clean. The milk mouths have a unique drainage design, which is convenient to receive milk.
The separation speed can reach 11000rpm at most, and the internal part of the machine can reach a semi vacuum state due to the influence of water vapor pressure and gravity. Strong power, high output and good sealing. The power supply voltage range of milk separator is 100V-240V, which can be used in various occasions of commercial 220V and household 110V to improve efficiency. The noise of electric milk cream separator is smaller than that of manual milk cream separator. The roller is specially balanced treatment, the machine body does not shake when it is used.
In order to prolong the service life of the motor, it is recommended that the continuous service time shall not exceed 40 minutes. Only fresh milk can be separated. Processed dairy products can NOT be separated. The temperature of the separated milk is between 35 40.How to Regulate the Milk Fat Concentration? Adjust the screw as shown in pic, tighten the screw to the right to make the milk fat thinner and the screw to the left to make it thicker. After adjusting the screw, they should be screwed as little as possible to avoid loosening in later use. Close the milk container switch(Metal Rod) and continue to separate the milk in the milk pot container. Turn off the power switch of the separator and stop the separation. After the separator stops rotating (Note: it cannot be stopped manually), remove all parts in turn. The milk pot container only needs to be removed in order and washed with hot water and cold water once respectively. The separator works continuously for 1 hour (after separation of 50L of milk), and the separator bowl must be removed and washed once.
For the separation bowl cleaning, loosen the copper nut, take out all parts, clean them with hot water several times, dry them and then install them in the original order. All parts must be disassembled for cleaning.
Please refer to the manual for details. It is suitable for any food production. It can make Butter, Cheese, Cake, Ice Cream, Milk Tea and Milk Shake. It can also be used as a commercial machine.
Dessert shop, Bakery, Coffee ShopDairy, Ranch, etc. Basic Dimensions 50 x 36 cm. Voltage100V-240V Home 110V, Business 220V.Volume Ratio of Milk to Skimmed Milk: 1:4 1:10. Fat Content of Skimmed Milk: 0.05%. 1 x Skimmed Milk Mouth. All items are dispatched from our warehouse in NJ/LA. We deliver to Lower 48 states.
Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit.
Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage.
Used items will not be accepted for return. We will require a picture of the damaged part for verification.
We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and thats why our customers keep coming back. The item "Marada Electric Milk Cream Separator Centrifugal Home & Business for Butter Milk" is in sale since Thursday, December 24, 2020.
This item is in the category "Business & Industrial\Agriculture & Forestry\Livestock Supplies\Dairy Cattle". The seller is "marada-homepro" and is located in Rowland Heights, California. This item can be shipped to United States.